Commercial floor, tile and grout cleaning
Grout is porous. In a commercial kitchen it soaks up grease, spills and traffic until the lines go from grey to black and mopping stops making any difference. Steam pulls that back out of the grout instead of sealing more of it in. Nano Clean restores commercial tile and grout across the Edmonton area.
Why mopping stops working
A mop moves dirty water across the floor and pushes it into the grout lines, which sit lower than the tile. Over time the grout becomes a reservoir for everything the mop has picked up.
Steam heats and lifts that buildup out of the pores so it can be removed rather than redistributed. It's the difference between cleaning a floor and rearranging it.
Sealing afterwards
Once grout is clean, sealant keeps it that way. It slows how quickly grease and spills soak back in and makes your daily cleaning noticeably more effective.
It's optional. Barry will tell you whether your floor is a good candidate — on some surfaces it makes a large difference, on others it isn't worth the cost.
What we do
- Tile floor deep cleaningCeramic, quarry tile, porcelain and stone.
- Grout line restorationGrout brought back to its natural condition, not painted over.
- Sealant applicationOptional, for tiles and grout lines.
- Drains and floor edgesThe corners and perimeters a mop never reaches.
- Behind and under equipmentWhere spills accumulate out of sight.
- Non-slip treatmentAvailable at the same visit if the floor turns slippery when wet.
Common questions
Can black grout be brought back?
Usually, yes. Most grout that looks permanently stained is loaded with absorbed grease rather than dyed, and steam lifts it out. Grout that's cracked, missing or previously painted may need regrouting instead — Barry will tell you straight.
Do I need sealant?
It isn't required, but it makes the clean last considerably longer in a commercial kitchen. Barry will advise based on your specific floor.
How long before we can walk on it?
Dry vapour steam is 94% dry, so floors are back in service quickly. Sealant needs longer to cure — Barry will give you a firm time before starting.
Can you clean the floor and treat it for slip resistance in one visit?
Yes, and that's the right order. Non-slip treatment works best on properly cleaned tile and grout.
Our other services
One crew, scheduled around your hours.
Ceiling Cleaning
Acoustic and non-acoustic tiles, stipple, painted and wood ceilings — plus vents, light lenses and high dusting.
Learn moreWall Cleaning
Painted, vinyl, wood and every other surface, degreased back to original colour.
Learn moreRestaurant Kitchen Deep Cleaning
Equipment, greasy surfaces, coolers and the hard-to-reach places routine cleaning never touches.
Learn moreNon-Slip Floor Treatment
For ceramic, terrazzo, concrete, marble and stone that turns dangerous when wet.
Learn moreCeiling & Wall Painting
Any kitchen ceiling or wall, painted after cleaning — onto a properly degreased surface.
Learn moreDry Vapour Steam
The 220°F chemical-free method behind everything we do — and why ceilings can be cleaned instead of replaced.
Learn moreFree estimates across greater Edmonton
Barry will come out, look at your space, and give you a firm price. No obligation.
Call Barry — 780-914-0323